close
Consistent Ultra Guard Waterbased Polyurethan Outstanding
Consistent Ultra Guard Waterbased Polyurethan Outstanding

Consistent Ultra Guard Waterbased Polyurethan Outstanding

Studio Design
$19.19 $31.99

Ultra Guard Waterbased Polyurethane is the i protective varnish designed to enhance and safeguard your interior surfaces with exceptional durability and ease of use. Non-yellowing and reinforced with silica for increased...

Tags:
No tags

Ultra Guard Waterbased Polyurethane is the i protective varnish designed to enhance and safeguard your interior surfaces with exceptional durability and ease of use. Non-yellowing and reinforced with silica for increased resistance to abrasion, ensuring your furniture, worktables, wood floors, and other surfaces look their for years.

THIS PRODUCT SHOULD NOT ZE so during the winter months we are unable to ship this product out.  We will begin shipping this product again when the weather warms up. If you live near our warehouse in Etobicoke, Ontario, you are welcome to place your order and come pick it up.  

Say goodbye to streaks and clouding, and hello to a finish on all your projects! With its water-based, non-yellowing formula, Ultra Guard is for both dark and light surfaces.

Versatile Application: Suitable for interior water-based paints and all types of bare wood. Available in both Flat and Satin sheen.

Enhances Colour: When applied, the product goes on whitish and dries transparent, enhancing both light and dark colours.

Application Instructions:

  • Prepare the Surface:

    • Painted Surfaces: Clean and degrease with TSP . Wait 24-48 hours after painting before applying.
    • Bare Wood: Sand smooth with 120-grit sandpaper, ensuring it's from wax and contaminants. Remove dust before application.
  • Mixing:

    • Mix thoroughly with a stick and wait 20 minutes before applying.
  • Application:

    • Use a synthetic bristle brush or a microfiber roller. Sand lightly with 220-grit sandpaper between coats.
  • Number of Coats:

    • Painted Surfaces: 2 coats .
    • Bare Wood & Non-Sealing Stains: 3 coats for optimal protection.

    Drying Times:

    • Between Coats: Allow 3 to 48 hours. After 48 hours, lightly sand before the next coat.
    • Bare Wood: Apply the second coat after 3 hours without sanding.
    • Before Sanding: Wait 6 to 8 hours before sanding for a smooth finish.